For the best results, your image resolution should be 300 PPI (pixels per inch) at the size you want to print.
Likewise, What size should at shirt design be in Illustrator?
general rule of thumb for T-Shirt designs is to start with 14 inches for width and 17 inches for is to start out with 14 inches for the width and 17 inches for the height (you can always adjust this later).
Subsequently, What size should my t-shirt design be? ADULT
| Shirt Size | Standard Width | Suggested Design Width |
|---|---|---|
|
Medium |
20 inches |
10-11 inches |
| Large | 22 inches | 10.5-11.5 inches |
| X-Large | 24 inches | 11-12 inches |
| 2X-Large | 26 inches | 12.5-13.5 inches |
What size image is best for t-shirt printing? The ideal size for the graphic on a long sleeve t-shirt is somewhere between 2.5” x 14” and 3.5” x 15.” You want to start the design about a finger down from the shoulder and make sure it doesn’t end up hitting the wrist area.
Similarly, What size should a graphic be on a shirt? 1. Large Front Graphics. If you want a nice, big graphic, 11 to 13 inches is typically the size of what you’ll print on the shirt, depending on the size of your shirt. The longest side of a sheet of paper is 11 inches long, giving you a nice visual representation of how large your graphic may look on a shirt.
Table of Contents
What file format is best for t-shirt printing?
Illustrator, JPEG, PSD and DSC 2.0, PNG, PDF and TIFF are the best file formats for t-shirt printing. There are actually many benefits to PNG files. However, it is important to note that when JPEG file is saved, it is compressed and artifacts built in the process.
What size should t-shirt graphics be?
In general- adult sized shirt designs should be between 11 and 14 inches. For kids sized shirts, you only need between 5.5 and 9 inches. Of course, the design size can change depending on what you’re making, but these are good sizes to start with.
What is the average size of a logo on a shirt?
The classic, and the go-to location for your logo when you’re providing shirts for employees, or staff for an event, or anything really. The size is tasteful; typically 3” to 4” wide, and around 3″ down from the collar. Placement can adjust to correspond with the size of the shirt, so it always looks right.
How do I prepare my art for t-shirt printing?
6 Great Tips On How To Prepare Artwork for T-Shirt Printing
- Use PMS Colors in Your Artwork.
- Convert All of Your Text to Outlines.
- Create Your Artwork at Actual Size.
- Use Vector Artwork As Much As Possible.
- Expand Your Strokes.
- Set Your Half-Tones with PMS Colors.
What size should at shirt design be in Photoshop?
A good rule of thumb for T-Shirt designs is to start out with 14 inches for the width and 17 inches for the height (you can always adjust this later). Change your resolution to 300. Your resolution is extremely important because it will have a significant effect on how the logo will look when it is printed.
How do you imprint a picture on a shirt?
The traditional way to put a picture on a shirt is to use transfer paper, a printer, and a heat source like an iron. Other methods include using a heat press, screen printing, or applying Cricut-cut vinyl. For a non-DIY option, many online stores accept custom orders and will print a photo onto a shirt at a low cost.
How far down should a logo be on a shirt?
Left Chest
This is the most common position for logo placement, making it the most recognizable to the consumer eye. From the left shoulder seam, measure 7″-9″ down and center between the center and side seam of the shirt. Another option is to measure 4″-6″ to the right of center.
How can I put my logo on a shirt?
Most logos are left chest aligned allowing for a name, or a name patch to be placed on the right of the persons chest. The inside edge of the collar is used as a vertical center line for aligning the logo or design. The bottom of the logo is typically no lower than the bottom of the placket of the polo.
How do I get my shirt design print ready?
Preparing design for print
- Use PMS or CMYK color modes. You might be used to doing online artwork in RGB, but to ensure the most accurate colors with a silk screener, definitely use PMS and CMYK color modes. …
- Convert all text to outlines. …
- Create artwork at actual size. …
- Use vector artwork as much as possible. …
- Expand strokes.
Can you print a PNG on a shirt?
A JPEG forces you to use it’s set a background colour, while a PNG has a transparent background and can be placed directly over the colour of your shirt.
How far down should a design be on the front of a shirt?
If your design is a regular full front size, the standard placement for that will start at 4” from the bottom of the collar, and the design will extend as far down as it goes, to the edge of the maximum print area. If your design is a small center chest, that changes things a bit.
Where should a logo go on a shirt?
A: The most common logo placement on a shirt is on the left chest. This has become the most common placement due to the original handshake, which would force your right hand to extend and therefore cover up the right chest area and your logo.
What is a good size for a logo?
A general rule is to make your signature image no larger than 320px wide, and 70–100px high. Most mobile devices are typically between 320px and 500px wide, so this will ensure your logo looks great on all mobile screens!
What files are needed for t-shirt printing?
Illustrator, JPEG, PSD and DSC 2.0, PNG, PDF and TIFF are the best file formats for t-shirt printing.
What file format is best for screen printing?
The best file format to send your artwork in is an AI. (Adobe Indesign) file or high-resolution PSD file. This means your resolution should be at 300 DPI. If you can’t send your artwork as an AI or high-res PDF, the next best way is a vector PDF or a high-resolution PNG or JPEG.
How do you put a logo on a shirt in Illustrator?